manualshive.com logo in svg

Fujitsu fi-7160, Operator'S Manual, Page: 226 / 229

Share
Download
Fujitsu fi-7160 Operator'S Manual Download Page 226

Introduction

 Glossary

Appendix

Glossary

Index

Contents

TOP

226

How to Load 
Documents

Configuring the 
Scan Settings

How to Use the 
Operator Panel

Various Ways to 
Scan

Daily Care

Troubleshooting

Operational 
Settings

Replacing the 
Consumables

Scanner 
Overview

U

Ultrasonic sensor

A sensor that detects multifeed errors by ultrasonic soundwave. It detects multifeeds by monitoring the difference in the 
amount of ultrasonic waves transmitted through the documents.

USB

USB (Universal Serial Bus) is a standard for interfaces used to connect devices such as keyboards and scanners. Up to 127 
devices can be connected by this interface. It can be connected and disconnected without powering off the devices.
For USB 3.0, the data transfer rate is a maximum of 480 Mbps in Hi-Speed and a maximum of 5 Gbps in Super-Speed  mode.
For USB 2.0, the data transfer rate is 1.5 Mbps in Low-Speed, 12 Mbps in Full-Speed, and a maximum of 480 Mbps in Hi-
Speed mode.
For USB 1.1, the data transfer rate is 1.5 Mbps in Low-Speed and 12 Mbps in Full Speed mode.

W

White reference sheet

The white part located inside the ADF which the scanner defines as white, in order to adjust the brightness of all other areas 
accordingly.

Z

Zone OCR

A function which performs text recognition on the specified area of the scanned image.

Summary of Contents for fi-7160






































































































































































































































Reviews:

No comments