![Fujitsu Fi-7030 Operator'S Manual Download Page 15](http://html.mh-extra.com/html/fujitsu/fi-7030/fi-7030_operators-manual_120731015.webp)
Chapter 1 Scanner Overview
15
This section shows the names of the scanner parts.
Front
1.2 Parts and Functions
Stacker
Stacks up the ejected documents.
Operator Panel
Consists of a Function Number Display,
buttons, and LED indicator.
Can be used to operate the scanner or check
the status.
For details, refer to
.
ADF (Automatic Document Feeder)
Pulls and feeds the documents one sheet at a time
from the ADF paper chute (feeder).
Open this to replace consumables or to clean the
inside of the scanner.
Side Guides
Positions the documents in place when the
documents are loaded in the ADF paper chute
(feeder) as they are fed into the scanner.
Chute Extension 2
Pull out to adjust to the document length.
ADF Paper Chute (Feeder)
Holds the documents to be scanned.
ADF Release Tab
Pull this tab to open the ADF.
Chute Extension 1
Pull out to adjust to the document length.
Stacker Extension
Slide out to adjust to the document length.