Chapter 4 Various Ways to Scan
73
■
Scanning in Single Feed mode
1
Lift up the pick roller unit.
Push up the tab in the middle with your finger.
The pick roller unit will click into place.
The hopper moves up to the feeding position.
2
Load a document on the hopper with the front side
(scanning side) facing up.
Make sure not to place the document all the way in.
3
Scan the document with the image scanning application.
For details, refer to the image scanning application manual.
4
Insert the document until the top edge touches the rollers
on the inside.
The document is picked, scanned, then ejected onto the stacker.
After the scan, the scanner waits for the next sheet to be fed for
the time specified in the Software Operation Panel.
Make sure that there is no document left on the
hopper.
Be careful not to have your fingers or anything caught
when the hopper moves up.
Pick Roller Unit
Let go of the document as soon as you confirm that the
document is being fed by the rollers.
Roller
