Chapter 7 Troubleshooting
119
Quality of scanned text or lines is unsatisfactory.
*1: When scanning in halftone, grayscale or color, the scanned image may
not become sharp and clear. If it can be configured in the scanner
driver's setup dialog box, set the image mode to [Binary (black and
white)].
Are the glasses and rollers inside the ADF clean?
No
Clean the dirty locations.
For information on how to clean the dirty locations, refer to
.
Yes
Is the resolution appropriate?
No
Specify a higher resolution in the scanner driver.
Yes
Is [Binary (black and white)] mode selected?
No
Select [Binary (black and white)] in the scanner driver.(*1)
Yes
Is there any foreign matter (e.g. dust, paper dust) on the
document?
Yes
Remove any foreign matter off the document.
Such foreign matter on the document may be transferred onto the glasses inside
the ADF and cause the images to become dirty.
No
If the above countermeasures do not solve the problem, check the items in
Before You Contact the Scanner Service Provider" (page 128)
first, then contact
your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider.
