manualshive.com logo in svg

Fujitsu FI 6140 - Document Scanner, Operator'S Manual

Share
Download
Fujitsu FI 6140 - Document Scanner Operator'S Manual Download Page 67

3.1 Scanning Both Sides of Documents

fi-6140 / fi-6240 Image Scanner Operator's Guide

 

 

 

TROUBLESHOOTING

 

CONTENTS MAP

 

TOP

    

 

 3.1 Scanning Both Sides of Documents

 

 

 
 

1.  Place the document on the ADF paper chute.

For details on how to place documents, see Section "

2.2 Loading Documents on the ADF for Scanning.

"

 

 

2.  Launch ScandAll PRO.

 

From the [Start] menu, select [All Programs] 

→

 [Fujitsu ScandAll PRO] 

→

 [Fujitsu ScandAll PRO] in the order 

presented. Then, ScandAll PRO starts up.

 

3.  From ScandAll PRO, display the setup dialog box of FUJITSU TWAIN 32.

 

For information about how to display the scanner driver

’

s setup dialog box, see Section "

2.6 How to Use ScandAll PRO.

"

 

4.  Select [ADF [Duplex]] under [Scan Type].

 

5.  Click the [OK] button.

 

 Changes made on this dialog box are saved and the setup dialog box of FUJITSU TWAIN 32 closes.

 

6.  From the ScandAll PRO window, perform a scan.

file:////10.232.227.50/Manual/fi-6140_6240C-Lynx3/OG/R02/02_081030/contents/EN/03/c03_01_01.htm (1/2) [2008/10/30 12:41:50]

Summary of Contents for FI 6140 - Document Scanner



































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands