Fujitsu FI-6130 Operator'S Manual Download Page 69

Page: 69 / 222

3.2 Scanning Books [fi-6230 only]

fi-6130 / fi-6230 Image Scanner Operator's Guide

TROUBLESHOOTING

CONTENTS MAP

TOP

3.2 Scanning Books [fi-6230 only]

CAUTION

Never look into the light source directly during scanning.

1. Open the document cover.

2. Remove the document cover as shown in the figure below.

3. Read the document on the document bed face down.

4. Launch ScandAll PRO.

From the [Start] menu, select [All Programs]

→

[Fujitsu ScandAll PRO]

→

[Fujitsu ScandAll PRO] in the order

presented. Then, ScandAll PRO starts up.

file:////10.232.227.50/Manual/fi-6130_6230_Lynx3L/OG/R02/02_081030/contents/EN/03/c03_02_01.htm (1/2) [2008/10/30 15:14:07]

Summary of Contents for FI-6130































































































































































































































Search results

Summary of Contents for FI-6130

Reviews:

Related manuals for FI-6130

Brands by name

Popular brands

Fujitsu FI-6130, Operator'S Manual

Search results

Summary of Contents for FI-6130

Reviews:

Related manuals for FI-6130

Brands by name

Popular brands