manualshive.com logo in svg

Fujitsu FI-6130, Operator'S Manual

Share
Download
Fujitsu FI-6130 Operator'S Manual Download Page 17

1.2 Names and Functions of Parts

fi-6130 / fi-6230 Image Scanner Operator's Guide

 

 

 

TROUBLESHOOTING

 

CONTENTS MAP

 

TOP

    

 

 1.2 Names and Functions of Parts

 

 

 
This section describes the scanner parts and their functions. 

 Front

 

 

 

No.

Name

Function

1

ADF 

(Automatic Document Feeder)

Transports the document to the reading position 

automatically.

2

ADF paper chute

Holds in place the document pages / sheets that are fed 

into the ADF.

3

Paper chute extension 1

4

Paper chute extension 2

5

Side Guide

Adjusted to the width of the paper in order not to scan 

skewed pages.

6

ADF open lever 

Pull this lever toward you to open the ADF.

7

Operator panel

This panel consists of a Function No. Display, four 

operating push buttons, and a LED. 

8

Stacker

Scanned documents are ejected from the ADF onto this 

stacker.

9

Stacker extension 1  

[fi-6130 only]

10

Stacker extension 2  

[fi-6130 only]

11

Stacker extension  

[fi-6230 only]

12

Flatbed (FB) 

[fi-6230 only]

Place documents on the glass sheet by sheet for single-

sheet scanning.

13

Transport lock switch  

[fi-6230 only]

Used to lock the carrier unit inside the flatbed during 

transportation.

 

 Inside 

file:////10.232.227.50/Manual/fi-6130_6230_Lynx3L/OG/R02/02_081030/contents/EN/01/c01_02_01.htm (1/3) [2008/10/30 15:13:38]

Summary of Contents for FI-6130































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands