Chapter 5 Various Ways to Scan
64
Automatically Correcting Skewed Images
When the documents are fed into the ADF skewed, the
skewed images can be detected and straightened
automatically.
Note that upon deskewing the images, the paper size of the
documents are also detected.
1
Load documents in the ADF paper chute.
For details, refer to
"Chapter 2 How to Load Documents" (page 26)
2
Start up ScandAll PRO and click the [Scan] menu
J
[Scanner Setting].
D
The [TWAIN Driver (32)] dialog box appears.
3
Click the [Option] button.
D
The [Option] dialog box appears.
5.4 Configuring Post-Scan Operations and Handling
！
！
！
Note that the image may be output a few mm larger than the
document to avoid any part of the image to appear missing.
Document
Output image
If the [TWAIN Driver (32)] dialog box does not appear,
check the setting in ScandAll PRO by clicking the [Tool]
menu
J
[Preferences] to open the [Setup] dialog box,
then confirm that [TWAIN] is selected for [Device Driver]
in the [Scan] tab.
