manualshive.com logo in svg

Fujitsu FI-6000NS, Operator'S Manual, Page: 309 / 437

Share
Download
Fujitsu FI-6000NS Operator'S Manual Download Page 309

5.5 Replacing Parts

Network Scanner fi-6000NS Operator's Guide 

281

Scanner Care

5

5.5.1 Replacing the Pad Assembly

1. Remove any documents from the ADF paper chute.

2. Push the ADF release button, then hold both sides of the top cover and lift it open.

3. Remove the pad assembly from the scanner.

Squeeze the prongs on either side of the pad assembly together and pull it upwards and to 
the front, taking care not to snag the pick springs.

4. Insert the new pad assembly.

Holding the new pad assembly by its sides, insert into the pad assembly socket, taking care 
not to snag the pick springs.

ATTENTION

Be careful that the top cover does not shut on your fingers.

ATTENTION

Make sure that the pad assembly is firmly and fully inserted. If it is 
not correctly attached, document jams and other feeding errors may 
occur.

Squeeze prongs together and pull up

Summary of Contents for FI-6000NS






















































































































































































































































































































































































































































Reviews:

No comments