Fujitsu fi-5650C, Getting Started Manual

Page: 8 / 40

vi
CAUTION
The following describes important cautions
described in this manual.
Wipe any dust from the power plug.
Wipe off any dust from metal
parts on the power plug or metal
fittings with a soft, dry cloth.
Accumulated dust might cause
fire or electric shock.
Do not install in locations subject to
oil smoke, steam, humidity, and dust.
Do not install the scanner in
locations subject to oil smoke,
steam, humidity, and dust. Doing
so might cause a fire or electric
shock.
Do not use the scanner if you smell
strange odor.
If you detect heat coming from
the device or detect other prob-
lems such as smoke, strange
smells or noises, immediately
turn off the scanner and then dis-
connect its power plug.
Make sure that the smoking has
stopped, and then contact the
store where you bought the
scanner or an authorized
FUJITSU scanner service
provider.
Turn the scanner OFF if it is
damaged.
If the scanner is damaged for any
reason, turn off the scanner and
unplug the AC cable before
contacting the store where you
purchased the scanner.
Do not put liquids inside the scanner.
Do not insert or drop metal
objects in to the scanner.
Do not scan wet documents or
documents with paper clips or
staples.
Do not splash or allow the scan-
ner to get wet.
If foreign objects (water, small
metal objects, liquids, etc.) get
inside the scanner, immediately
turn off the scanner and
disconnect the power plug from
the power outlet, then contact
the store where you bought the
scanner or the Maintenance
Service Center.
Pay particular attention to this
warning in households where
there are small children.
Do not touch the inside of the
scanner unless necessary.
Do not take apart or modify the
scanner. The inside of the
scanner contains high-voltage
components. Touching these
components might cause fire or
electric shock.
Do not install the scanner on unsta-
ble surfaces.
Install the scanner on a desk so
that none of its parts protrude
outside of the desktop. Also,
make sure that the scanner is
installed on a flat, level surface.
Do not install the scanner on
unstable surfaces. Install the
scanner on a level surface that is
free of vibration to prevent it
from falling.
Install the scanner on a strong
surface that will support the
weight of the scanner and other
devices.
Firmly insert the power plug.
Firmly insert the power plug into
the power outlet as far it can go.