Fujitsu fi-5120C Operator'S Manual Download

Page: 114 / 157

fi-5120C / fi-5220C Image Scanner Operator

Guide

TROUBLE SHOOTING

CONTENTS MAP

TOP

6.1 Removing Jammed Documents (1)

2 3

If a document jam occurred, follow the procedure below to remove the jammed documents.

CAUTION

●

Take care not to get injured when removing jammed documents.

●

Be careful not to get neckties, necklaces, etc. entangled in the scanner when

removing the jammed documents

●

The surface of the glass may become hot during operation. Take care not to get

burned.

1. Remove any documents on the ADF paper chute.

2. Open the ADF by pushing on the ADF button.

ADF button

CAUTION

Be careful, the ADF cover may close and pinch your finger.

3. Remove the jammed document.

ATTENTION

●

Staples, paper clips, etc. cause document jams. Be sure to fully check the document

and feed path, and remove any small metal objects such as these.

Also, before you start scanning, be sure to remove any staples, clips, etc. from the

document.

●

Take care not to pull the pick springs when removing jammed documents.

2 3

Summary of Contents for fi-5120C















































































































































Search results

Summary of Contents for fi-5120C

Reviews:

Related manuals for fi-5120C

Brands by name

Popular brands

Fujitsu fi-5120C, Operator'S Manual

Search results

Summary of Contents for fi-5120C

Reviews:

Related manuals for fi-5120C

Brands by name

Popular brands