78
■
Scanning only one side of a document
As the default setting, pushing [SCAN] button
on ScanSnap product starts scanning docu-
ments in "Duplex" mode. If you wish to start "Simplex" scanning by pressing the [SCAN] button,
change the settings following the procedure below.
Operation
1. Right click the "ScanSnap Manager" icon
on the task bar and select "Setting"
from the menu.
2. Click [Scanning] tab and select "Simplex scan" at "SCAN button:"s.
3. Click [OK] button to close the window.
4. Load the document onto the scanner.
5. Press the [SCAN] button
.
⇒
The document is scanned in the "Simplex" mode.
HINT
To return the setting to the "Duplex" mode, select [Duplex scan] in step 2
above. The selected setting is applied to further scans unless it will be changed
again.
SCAN
S
S
SCAN
Summary of Contents for Fi-5110EOX2 - ScanSnap! - Document Scanner
