Fujitsu fi-5000N Operator'S Manual Download Page 93

Page: 93 / 118

7.2 Parts to Clean and Cleaning Method

fi-5000N Operator’s Guide

Daily Care

7.2 Parts to Clean and Cleaning Method

Part to clean

Cleaning Method

Remarks

Cover

Wipe the Cover with a lint-free dry
cloth.

Fingerprint
Sensor

Wipe the Fingerprint Sensor gen-
tly with a dry lint-free cloth.

Do not splash any liquids or allow
the fi-5000N to get wet.
Do not use flammable solvents
such as benzine.

ATTENTION

Cleaning the Fingerprint Sensor

The sensor might not function correctly in the following situations. Clean the
sensor surface on a regular basis.

•

Sensor surface is dirty with dust or any other dirt

•

Sensor surface is wet.

•

There are dew drops on the sensor surface.

Clean the fingerprint sensor when the following problems occurs. Cleaning
the sensor might solve such problems.

•

The Display Message shows "Sensor surface not clean. Please wipe
sensor, and restart device".

•

Although the finger is away from the sensor, the Display Message
keeps showing "Remove your finger from the sensor".

•

Fingerprint registration failures and/or fingerprint identification failures
occur frequently.

Summary of Contents for fi-5000N























































































































Search results

Summary of Contents for fi-5000N

Reviews:

Fujitsu fi-5000N, Operator'S Manual, Page: 93 / 118

Search results

Summary of Contents for fi-5000N

Reviews: