Chapter 8 Commands
8.5 Backup Status Query Command (stxvquery)
ETERNUS VSS Hardware Provider 2.1 User’s Guide
Copyright 2012 FUJITSU LIMITED
P3AM-4582-03ENZ0
59
8.5
Backup Status Query Command (stxvquery)
This command displays the Advanced Copy status.
Execute this command on a backup server.
■
Format
■
Execution example
■
Displayed contents
"Installation folder"\bin\stxvquery
C:\>"C:\Program Files\ETERNUS VSS Hardware Provider\bin\stxvquery"
id,elapsed-time,kind,source-box-id,source-olu-no,target-box-id,target-olu-no,
status,phase,execute,update,genaration,transfer,recovery
----------------------------------------------------------------------------------
---------------------------------------------------
0x0007,120,QOPC,00E4000M3#####E430S20AU###MP4020738001##,0x0007,00E4000M3#####E430
S20AU###MQ5020739011##,0x001d,executing,copying,8%,---,---,---,---
stxvquery successfully completed.
C:\>
Title
Description
id
The session ID of the chassis is displayed.
A hexadecimal number of four digits is displayed with "0x" in front of the hexadecimal
number.
When the OLU number is 1, it is displayed as "0x0001".
elapsed-time
The elapsed time from the beginning of the copy is displayed. (unit: second)
kind
The copy type is displayed.
QOPC: QuickOPC
SOPCP:
source-box-id
The BOX ID of the source disk is displayed.
source-olu-no
The OLU number of the source disk is displayed.
A hexadecimal number of four digits is displayed with "0x" in front of the hexadecimal
number.
When the OLU number is 1, it is displayed as "0x0001".
target-box-id
The BOX ID of the Shadow Copy destination is displayed.
target-olu-no
The OLU number of the Shadow Copy destination is displayed.
A hexadecimal number of four digits is displayed with "0x" in front of the hexadecimal
number.
When the OLU number is 1, it is displayed as "0x0001".
status
The session status is displayed.
executing: operating normally
errsuspend: suspended by an error
halt: suspended in the hardware