Fujitsu ETERNUS SF Express V16.6 Migration Manual Download | Manualshive

Page: 44 / 378

background image

3.2.3.4 Deleting Backup Data

Once normal operation has been confirmed after the upgrade, the backup data in the backup destination directory created in step 5
of "

3.2.1.1 Backing Up Operational Environment of Previous Version

" maybe deleted.

3.2.3.5 Uninstalling Symfoware

In the version level of this ETERNUS SF Manager, Symfoware is not used.
Symfoware should only be installed in cases where it was used by ETERNUS SF Manager only.

The procedures to uninstall Symfoware are stated below.

1.

Start the uninstaller of Symfoware to delete the Symfoware package.
Before deleting the package, confirm that none of the package functions used by any system other than ETERNUS SF Manager.

# /opt/symfoware/setup/symfo_remove

2.

Confirmation message to uninstall Symfoware is displayed. To perform the uninstallation, enter "y". To cancel the process, enter
"q".
When "y" is entered, a message allowing to select the function to uninstall is shown. Input "all" or "number to delete" to select
the function to uninstall.
A message to re-confirm uninstallation appears. Enter "y" to perform out the uninstallation and "q" when it is not required.

Example of Uninstallation with the Specification "all"

Start checking the installation environment.

Check of installation environment is ended.

WARNING: There is a possibility that another product uses "Symfoware Server

Enterprise Edition".

Continue the uninstallation?

y: Continue the uninstallation

q: End directly without uninstallation

[y,q]: y

Uninstallation of "Symfoware Server Enterprise Edition" begins.

Please select the functions to be uninstalled.

1: Base function (Server function, Client function)

Separate multiple selections with ",". (Example: 1, 2)

[all:All functions,1,q]: all

Selected functions

- Base function (Server function, Client function)

Start the uninstallation of the above functions?

y: Uninstallation begins

n: Select the functions again

q: End directly without uninstallation

[y,n,q]: y

Uninstallation begins.

3.

The following message is displayed after the Symfoware uninstallation is completed normally.

Uninstallation of "Symfoware Server Enterprise Edition" is ended normally.

3.2.4 Resuming Operation

When the tasks described above have been performed, the upgrade of Express is complete. Restart the Express operation.

- 20 -

«
...
42
43
44
45
46
...
»

Summary of Contents for ETERNUS SF Express V16.6



























































































































































































































































































































































































Reviews:

No comments

Related manuals for ETERNUS SF Express V16.6

MOBILERAID MR5S1

Brand: Sans Digital Pages: 1

Brand: US Robotics Pages: 36

Brand: Quantum Pages: 78

NSLU2 - Network Storage Link NAS Server

Brand: Linksys Pages: 64

Brand: Seagate Pages: 40

Brand: Homak Pages: 3

Brand: CASARIA Pages: 13

Brand: Badger Basket Pages: 6

Brand: U-Line Pages: 3

Brand: M-Systems Pages: 22

Barracuda 5400.1 ST340015A

Brand: Seagate Pages: 2

PRIMERGY SX910 S1

Brand: Fujitsu Pages: 46

PRIMERGY PG-DTA101

Brand: Fujitsu Pages: 70

Brand: Fujitsu Pages: 21

Brand: Fujitsu Pages: 92

Streamer DAT 160

Brand: Fujitsu Pages: 41

Brand: Fujitsu Pages: 15

Brand: Fujitsu Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands