function with an absolute path. When the performance management function is not being used, it is unnecessary to
specify a directory for the
tmpDir
.
# /mnt/dvd/Manager_unix/vuptools/esfpreinst.sh backupDir [tmpDir]
When the backup fails, after confirming the output error message and removing the cause of the failure, execute the
command again.
Point
-
Spaces and the characters " / ` * ? \ $ [ ] , % ! { } are not supported for directory names.
-
The number of characters in a directory name must be up to 220.
-
Move the files (
tmpDir
) related to the performance management function to under /var/opt. In the case of backup to
a different location from that under /var/opt, it may take time to perform backup and restore.
3.2.1.2 Checking for Available Disk Space
Ensure that there is enough available disk space on the server where the upgrade is performed.
The required disk space for the upgrade is calculated as the "Required Disk Space for New Version" minus the "Required Disk Space for
Previous Version".
Required Disk Space for New Version
The space required to install this version of the ETERNUS SF Manager.
Refer to "Operating Environment of ETERNUS SF Manager" in the
ETERNUS SF Installation and Setup Guide
for this version for
information on the required disk space.
Required Disk Space for Previous Version
The space required to install the previous version of the ETERNUS SF Manager.
Refer to "Operating environment of ETERNUS SF Manager" in the
ETERNUS SF Installation and Setup Guide
for the relevant previous
version for information on the required disk space.
3.2.1.3 Uninstalling Incompatible Software
Check if any incompatible software for this version of the ETERNUS SF Manager is installed on the server where the upgrade is
performed. If incompatible software is found, refer to the relevant software manual and uninstall it before starting the upgrade.
See
Refer to "Operating Environment of ETERNUS SF Manager" in the
ETERNUS SF Installation and Setup Guide
for this version for
information on the incompatible software.
3.2.1.4 Estimating Database Size
A database is necessary for this version of Express.
The database size must be estimated before starting the upgrade.
See
Refer to "Before Installation" in "Installation of ETERNUS SF Manager" in the
ETERNUS SF Installation and Setup Guide
for this version
for details.
3.2.1.5 Tuning Kernel Parameters
Kernel parameter tuning must be performed in order to use this version of the Express. Therefore, perform the necessary kernel
parameter tuning before starting the upgrade.
- 17 -
