programDir\Common\bin\esfadm devconf import -all
After executing the
command, confirm that "Complete" is displayed in IMPORT STATUS column in the
In addition, confirm that "Complete" is displayed in STATUS column of the import status of the migration target resources. When
"Failed" is displayed, the import of configuration information has failed. Refer to "
12.2 What to Do When Error Occurs
" to take the
corrective action.
Note
When executing the
command, if a managed device or server is not accessible, the
command should be re-executed since the device configuration information is not imported.
2.3.3 Setting Up User Account
Set up a user account in order to use the ETERNUS SF Manager functions.
Refer to "Setting Up User Account" in the
ETERNUS SF Installation and Setup Guide
for this version for information on setup.
2.3.4 Setting Up Web Console
If firewalls are used between the PC on which Web Console is launched and the Management Server, perform firewall settings to allow
transmission.
Refer to "Setting Up for Using Web Console" in the
ETERNUS SF Installation and Setup Guide
for this version for information on firewall
setup.
Note
When upgrading Express Version 14.2, if operating Web Console from the same web browser as before the upgrade, delete the web
browser's cache prior to operation.
2.3.5 Setting Account Information for Access to ETERNUS Disk Storage System
Set the account information, user name and password to access the ETERNUS Disk storage system.
Refer to "Set/Change Information of Account That Can Access ETERNUS Disk Storage System" in the
ETERNUS SF Web Console Guide
for
this version for information on setup.
2.3.6 Registering License
Register the appropriate licenses.
Refer to "License Management" in the
ETERNUS SF Installation and Setup Guide
for this version for information on the license settings.
2.3.7 Redefining Operational Environment
-
Redefining the administrator information
Based on the information that was backed up in step 1 of "
2.1.1 Backing Up Operational Environment of Previous Version
", define
the administrator information.
Refer to "Display/Change Contact Information" in the
ETERNUS SF Web Console Guide
for this version for information on how to
define the administrator information.
-
Re-registering the server information and the HBA information
Based on the information that was backed up in step 1 of "
2.1.1 Backing Up Operational Environment of Previous Version
", register
the server information and the HBA information registered on Express.
If AdvancedCopy Manager was installed in the previous version and the Management Server served as the Managed Server, register
the server as the Management Server with the following procedure:
- 9 -
