Fujitsu ETERNUS LT40 S2 Installing, Starting Up And Maintaining Download Page 52

Page: 52 / 110

Chapter 3 Operating the Tape Library
3.5 Remote Management Unit (RMU)

FUJITSU Storage ETERNUS LT40 S2/LT60 S2 LTO Library Installing, Starting Up and Maintaining

P3AM-5392-07ENZ0

The following information can be found, although no changes can be made from this page:

•

Serial Number

•

Product ID

•

Currently Installed Library Firmware

•

Bootcode Firmware Revision

•

Barcode Reader

•

Library Mode

•

WWide Node Name

If the unit has more than one partition the properties of all logical libraries are displayed.

Figure 3.9 ETERNUS LT40 S2: Identity, Library page

3.5.4.2

Viewing Static Drive Information

This page provides detailed information about the drive(s). No changes can be made from this page.

Figure 3.10 ETERNUS LT40 S2: Identity, Drive page

Summary of Contents for ETERNUS LT40 S2















































































































Search results

Summary of Contents for ETERNUS LT40 S2

Reviews:

Related manuals for ETERNUS LT40 S2

Brands by name

Popular brands

Fujitsu ETERNUS LT40 S2, Installing, Starting Up And Maintaining

Search results

Summary of Contents for ETERNUS LT40 S2

Reviews:

Related manuals for ETERNUS LT40 S2

Brands by name

Popular brands