Fujitsu ETERNUS LT40 S2 Installing, Starting Up And Maintaining Download Page 108 | Manualshive

Page: 108 / 110

background image

Chapter 9 Regulatory Information
9.2 FCC (United States)

FUJITSU Storage ETERNUS LT40 S2/LT60 S2 LTO Library Installing, Starting Up and Maintaining

Copyright 2018 FUJITSU LIMITED

P3AM-5392-07ENZ0

108

9.2

FCC (United States)

The computer equipment described in this manual generates and uses radio frequency (RF) energy. If the
equipment is not installed and operated in strict accordance with the manufacturer's instructions, interference
to radio and television reception might result.

This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Part 15, Class A, of the FCC Rules, is designed to provide reasonable protection against radio and television
interference in a residential installation. Although the equipment has been tested and found to comply with
the allowed RF emission limits, as specified in the above cited Rules, there is no guarantee that interference
will not occur in a particular installation. Interference can be determined by turning the equipment off and on
while monitoring radio or television reception. The user may be able to eliminate any interference by
implementing one or more of the following measures:

•

Reorient the affected device and/or its receiving antenna.

•

Increase the distance between the affected device and the computer equipment.

•

Plug the computer and its peripherals into a different branch circuit from that used by the affected device.

•

If necessary, consult an experienced radio/television technician for additional suggestions.

9.3

Canadian Verification

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations (ICES-003, Class A)

9.4

CE Notice

This ETERNUS LT40 S2/LT60 S2 LTO Library product conforms to the following European Directive(s) and
Standard(s): Application of Council Directives: 73/23/EEC, 89/336/EEC. Standards to which Conformity is
declared: EN60950, EN55022, EN55024, EN61000-3-2, EN61000-3-3.

Tested To Comply

With FCC Standards

For Home or Office Use

«
...
106
107
108
109
110
»

Summary of Contents for ETERNUS LT40 S2















































































































Reviews:

No comments

Related manuals for ETERNUS LT40 S2

Brand: U-Line Pages: 3

Brand: SanDisk Pages: 2

DiamondMax Plus9 120GB AT

Brand: Maxtor Pages: 79

Brand: USP Pages: 4

MERCURY ELITE PRO MINI

Brand: OWC Pages: 8

301269U - Ethernet Disk Mini Home Edition 500 GB Network Attached Storage Hard...

Brand: LaCie Pages: 74

Brand: Canon Pages: 76

ProLiant DL100 G2 DPSS

Brand: HP Pages: 155

NetStorage 6000

Brand: HP Pages: 192

ProLiant DL100 G2 DPSS

Brand: HP Pages: 44

Brand: Philips Pages: 2

Brand: Philips Pages: 2

Brand: Philips Pages: 2

Brand: Philips Pages: 2

Brand: Philips Pages: 2

Active Crystals FM01SW80

Brand: Philips Pages: 2

FM FD35B Series

Brand: Philips Pages: 163

MicroVault USM-L

Brand: Sony Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands