Fujitsu ETERNUS LT160, User Manual

Page: 210 / 238

Cartridge Media and Bar Code Label Specifications
7-6 C144-E072-01EN
7.4.1.1 Specify the volume area
Any 6-digit string excluding "CLNOOO" and "DG(space)OOO" (OOO are arbitrary) can
be specified as the string for the volume area.
Table 7.4 lists characters that can be used
for the volume area.
Table 7.4 Usable characters
Character type Description
Upper-case alphabetic character 26 characters ranging from A to Z
Numeric character 10 characters ranging from 0 to 9
7.4.1.2 Deleting the media area
The media area is fixed at "L1."
7.4.1.3 Specifying the label for cleaning cartridge
Specify the serial number of the label for cleaning cartridge as "CLNIOOL1" (OO are
arbitrary).
7.4.2 Notes on label affixing
- Keep the label affixing surface clean and do not leave fingerprints and finger marks
on it.
- Affix the bar code label on the specified location (concavity beside the write protect
switch) of the tape cartridge correctly (See
Figure 7.3 ). If the label is affixed at an
incorrect location or such that is orientation is incorrect, the bar code may become
unidentifiable. After affixing the bar code label, press on it firmly. Notice that the
end parts of the label are easily broken.
- To replace the label, peel the old label from the tape and then affix a new one.
Label affixing
location
Write protect switch
Figure 7.3 Bar code label affixing location