Chapter 7 Setup
7.2 Basic Setup
ETERNUS DX60/DX80/DX90 Disk storage system User Guide
142
Copyright 2011 FUJITSU LIMITED
P3AM-3042-08ENZ0
1-3
On the logon screen, select the language (English or Japanese).
1-4
Type the following User name and Password, and click the [Logon] button.
User name: root
Password: root (default)
After logging on, the Storage System Status screen of GUI appears.
1-5
Click the [Initial Setup] menu on the [Easy Setup] tab.
The Start screen of the [Initial Setup] function appears.
1-6
Click the [Next >] button.
Figure 7.2
Start screen of the [Initial Setup] function
The [Set Date and Time] screen appears.
The confirmation screens for site certification may be displayed
when starting up GUI using SSL (https).
However, this should not cause any problems. Accept the site
certification and continue the process.
The following shows an example when using Internet Explorer 7.
The display contents vary according to your web browser.
There is a problem with this website's security certificate.
The security certificate presented by this website was not
issued by a trusted certificate authority.
Security certificate problems may indicate an attempt to
fool you or intercept data you send to the server.
We recommend that you close this webpage and do not
continue to this Web site.
The warning for the site certification is not displayed after
installing the certification.
For the procedure about site certification installation, refer to
"ETERNUS DX60/DX80/DX90 Web GUI User Guide".
