Chapter 4 Function/System Settings and Display
4.2 Advanced Copy Management
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED
P2X0-1030-09ENZ0
378
4.2
Advanced Copy Management
Advanced Copy is a function that copies an arbitrary volume of data at a certain point. The management unit
of Advanced Copy is referred to as "copy session" or "session".
Only type sessions can be started using CLI. However, all types of copy sessions can be displayed
and stopped.
The CLI commands for Advanced Copy are listed in the following table:
For details on REC (Remote Equivalent Copy), refer to
"4.2.4 Remote Equivalent Copy Management" (page
Advanced Copy functions for the ETERNUS DX Disk storage system have the following features:
•
Quick copy processes can be performed in units of a volume using ETERNUSmgr or CLI commands.
•
Snapshots of volumes can be created using the Windows Volume Shadow Copy Service function.
•
Backups and replications can be created using ETERNUS SF AdvancedCopy Manager.
This section explains how to perform Advanced copy in units of a volume using CLI. For details about setting
parameters for each command, refer to this manual.
Note that snapshots of the specified volume are created by the ETERNUS Advanced Copy function for the
ETERNUS DX Disk storage system. The purposes of the Advanced Copy function (such as creating backups and
replications) and the procedure for using the Advanced Copy function via OS or software depends on the OS or
software that is used. For details about purposes and procedures, refer to the manual of the OS or software
that will be used.
Manage the Advanced Copy function by performing copy operations, and checking and deleting copy sessions
after preparing the Advanced Copy function.
Function
Command
Advanced Copy license
set advanced-copy-license
delete advanced-copy-license
show advanced-copy-license
Advanced Copy policy
set advanced-copy-policy
show advanced-copy-policy
Advanced Copy parameter
set advanced-copy-parameters
show advanced-copy-parameters
Snap Data Volume (SDV)
initialize snap-data-volume
show snap-data-volume
Snap Data Pool (Pool/SDPV)
show snap-data-pool
delete snap-data-pool-volume
Advanced Copy session
start advanced-copy (only )
stop advanced-copy (all types)
show advanced-copy-sessions (all types)
Summary of Contents for Eternus DX410 S2
Page 2: ...This page is intentionally left blank ...
Page 756: ......