Fujitsu Eternus DX200F, User Manual

Page: 716 / 1082

Appendix A Parameter List
A.1 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
716
A.1.7.8 Setup SNMP Agent Trap
For details about this function, refer to "1.8.8 Setup SNMP Agent Trap" (page 123) .
For the factory default settings for this function, refer to "Appendix B Setup SNMP Agent Trap" (page 981) .
●
Setup SNMP Agent Trap
• Manager No.
• SNMP Version
• Community Name
• User Name
• Port No.
Description Select a manager number.
The management number of the SNMP Agent Manager, which has been registered in
"1.8.4 Setup SNMP Manager" (page 113) , is displayed as an option.
Input condition/
Display contents Manager01 - Manager10
Description Select the trap SNMP version.
Input condition/
Display contents
•
v1
•
v2c
•
v3
Description Select the community name used when sending a trap.
The community name, which has been registered in "1.8.7 Setup SNMP Agent
Community" (page 120) , is displayed as an option.
If the SNMP version is "v1" or "v2c", the "Community Name" must be specified.
Input condition/
Display contents Community names that are registered by using the [Setup SNMP Agent Community]
function
Description Select the user name used when sending a trap.
The user name, which has been registered in "1.8.6 Setup SNMP Agent User" (page 117) ,
is displayed as an option.
If the SNMP version is "v3", the "User Name" must be specified.
Input condition/
Display contents User names that are registered by using the [Setup SNMP Agent User] function
Description Input the port number of the trap destination.
When changing a port number, input a unique port number.
Input condition/
Display contents 1 - 65535