Fujitsu ETERNUS CS800 User Manual Download Page 595

Page: 595 / 604

LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR

CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN

CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

POSSIBILITY OF SUCH DAMAGE.

QLogic License

QLogic Linux Fibre Channel Adapter Firmware

Redistribution and use in binary form, without modification, for use in

conjunction with QLogic authorized products is permitted provided that the

following conditionsare met:

1. Redistribution in binary form must reproduce the above copyright notice,

this list of conditions and the following disclaimer in the documentation

and/or other materials provided with the distribution.

2. The name of QLogic Corporation may not be used to endorse or promote

products derived from this software without specific prior written

permission.

3. Reverse engineering, decompilation, or disassembly of this firmware is

not permitted.

REGARDLESS OF WHAT LICENSING MECHANISM IS USED OR APPLICABLE,THIS PROGRAM

IS PROVIDED BY QLOGIC CORPORATION "AS IS" AND ANY EXPRESS OR IMPLIED

WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO

EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,

SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED

TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,DATA, OR

PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF

LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,OR TORT (INCLUDING

NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS

SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

ETERNUS CS800

595

20 ETERNUS CS800 3.2 Open-Source Software

Summary of Contents for ETERNUS CS800





























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ETERNUS CS800

Reviews:

Related manuals for ETERNUS CS800

Brands by name

Popular brands

Fujitsu ETERNUS CS800, User Manual

Search results

Summary of Contents for ETERNUS CS800

Reviews:

Related manuals for ETERNUS CS800

Brands by name

Popular brands