Fujitsu ETERNUS CS800 User Manual Download Page 571

Page: 571 / 604

http://svn.codehaus.org/jetty/jetty/branches/jetty-

6.1/extras/win32service/LICENSE.txt

LTTng Tools

LTTng Tools licensing

David Goulet <

[email protected]

July 18, 2011

* LGPLv2.1

The library part is distributed under LGPLv2.1. See lgpl-2.1.txt for

details.

This applies to:

-) include/lttng/*

-) src/lib/lttng-ctl/*

We have some tests LGPL but should not impact anything even if we change

them in the future to GPL.

LGPL-compatible source code can statically use the library header using:

#define _LGPL_SOURCE

#include <lttng/lttng.h>

Dynamic-only linking with the LGPL library is used if _LGPL_SOURCE is not

defined. It permits relinking with newer versions of the library, which is

required by the LGPL license.

* GPLv2

All remaining source code is distributed under the GPLv2 license. See gpl-

2.0.txt for details.

ETERNUS CS800

571

20 ETERNUS CS800 3.2 Open-Source Software

Summary of Contents for ETERNUS CS800





























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ETERNUS CS800

Reviews:

Related manuals for ETERNUS CS800

Brands by name

Popular brands

Fujitsu ETERNUS CS800, User Manual

Search results

Summary of Contents for ETERNUS CS800

Reviews:

Related manuals for ETERNUS CS800

Brands by name

Popular brands