Fujitsu ETERNUS CS800, User Manual

Page: 301 / 604

Figure 191: Server Page
To specify the outgoing e-mail server:
1. In the Hostname or IP Address box, enter the hostname or IP address of the outgoing
e-mail server.
Additional Information
l
When entering IP addresses, never use an address that is in a reserved IP address
range. To see a list of reserved IP address ranges, click the quick tip icon
[?] located
near the IP address field.
l
To use hostname format, you must specify at least one DNS IP address on the
Network page (see "Network" on page 319 ).
2. In the From Email Address box, enter the return e-mail address displayed in e-mails
sent by the ETERNUS CS800.
Specify a return address that lets you easily identify the system that generated the e-
mail (for example,
systemname@any-domain.com
). The return address must contain an
@ symbol and a valid domain name, including a period.
3. (Optional) Select the Enable Admin Alerts about Email Server not configured
check box to have system generate administration alerts to notify you if an e-mail server
is not configured.
4. (Recommended) Select the Enable automatic emails to Fujitsu Technology
Solutions check box to periodically send system configuration and status information to
Fujitsu Technology Solutions, including any software upgrades you have installed using
the
Software Upgrade Utility . Fujitsu Technology Solutions Support can use this
ETERNUS CS800 301
10 Configuration