Fujitsu ETERNUS CS800, User Manual

Page: 289 / 604

l
To edit an existing event, double-click the event. If the event is recurring, select
Open this occurrence to edit only the one instance of the event, or select Open
the series to edit the entire recurring series, and then click OK .
You cannot edit an event that occurred in the past.
You can also right-click an existing event to see options for editing an event.
Adding a New Event
2. Define the start and, if applicable, the end of the event.
l
Specify the Start Date and Start Time using the pop-up calendar and drop-down
box.
l
(Replication throttle events only) Specify the End Date and End Time . The end
date and time must occur after the start date and time.
For a new event, you can click and drag to adjust the start and end time. For
an existing event, you can drag the event to change when it occurs. You can
also drag the left or right edge of the event to adjust the start or end time.
3. Enter a brief description of the event in the Description box. (This description will
display on the schedule view.)
4. Specify options specific to the type of event. See the following sections:
l
"Scheduling a Share or Partition for Replication" on page 290
l
"Scheduling Replication Throttling" on page 291
l
"Scheduling E-mail Reports" on page 292
l
"Scheduling Healthchecks" on page 292
l
"Scheduling Space Reclamation" on page 293
ETERNUS CS800 289
10 Configuration