Max
Connections
Enter the maximum number of connections allowed to the storage server
(3 to 65536).
The maximum number of connections cannot be changed if the storage
server has more than zero currently active connections. The number of
active connections is displayed on the
Fujitsu Technology Solutions recommends setting
Max
Connections
to 300.
Enable
Concurrent
Optimized
Duplication
Select the check box to enable optimized duplication during OST ingest.
Concurrent Optimized Duplication is disabled by default. If enabled, as
data is written to the storage server, it is simultaneously replicated to the
target ETERNUS CS800. When optimized duplication or Automatic
Image Replication subsequently occurs, the operation is more efficient
because a portion of the required data has already been replicated to the
target storage server.
To configure the target ETERNUS CS800, see .
When Concurrent Optimized Duplication is enabled, all data on the
storage server is duplicated, not just the specified images.
3. Select the check box for each optimized duplication target you want to duplicate the
storage server to. When the storage server is duplicated, its data will be sent to all
selected targets.
4. Click
Apply
.
Deleting a Storage Server
Delete a storage server if it is no longer needed. When you delete a storage server, all data
stored on the storage server is lost.
If you deleted the storage server from Symantec NetBackup or Symantec Backup
Exec, you must wait several minutes before deleting the storage server from the
ETERNUS CS800.
To delete a storage server:
Select the storage server in the
Storage Server List
.
You cannot delete a storage server if it has more than zero currently active connections. The
number of active connections is displayed on the
). Also, you cannot delete a storage server if it contains LSUs. Before deleting the
ETERNUS CS800
251
10 Configuration
Summary of Contents for ETERNUS CS800
