5.3 Cabling the ETERNUS CS800 S6 System
Every FC port can be configured for PPT.
Initially all FC ports are configured with the VTL target role. The port role can be
changed on page
Configuration > System > FC Initiators & Targets
of the Remote
Management Console.
Connecting the iRMC port is possible but typically not necessary. For example the
monitoring of the server hardware is included to the general monitoring provided by
the ETERNUS CS800 itself.
The service port of the CS800 should not be connected to the LAN.
CS800 Labelsheet
Together with each ETERNUS CS800 S6 a label sheet is delivered. The stickers on it are
intended to label the storages modules and their power cables (CE, DE-x, JX40-x) as well
as the internal LAN and FC cables to connect the DX100 to the server of the Scale model.
The cells within the tables below should represent the labels. All components delivered
with the initial order of the system are already labeled in the factory, i.e. the appropriate
positions at the sheet will be empty. The remaining labels are either obsolete (e.g. for a
different model of ETERNUS CS800 S6) or may be needed in the future to label additional
storage modules purchased for system enhancement.
DX100 Modules (SCALE)
CE
CE
CE
CE
CE
CE
DE-1
DE-1
DE-1
DE-1
DE-1
DE-1
DE-2
DE-2
DE-2
DE-2
DE-2
DE-2
DE-3
DE-3
DE-3
DE-3
DE-3
DE-3
DE-4
DE-4
DE-4
DE-4
DE-4
DE-4
DE-5
DE-5
DE-5
DE-5
DE-5
DE-5
DE-6
DE-6
DE-6
DE-6
DE-6
DE-6
DE-7
DE-7
DE-7
DE-7
DE-7
DE-7
DE-8
DE-8
DE-8
DE-8
DE-8
DE-8
DE-9
DE-9
DE-9
DE-9
DE-9
DE-9
DE-a
DE-a
DE-a
DE-a
DE-a
DE-a
ETERNUS CS800
88
Summary of Contents for ETERNUS CS800 S6
Page 1: ...English ETERNUS CS800 S6 User Guide V3 2 7 Edition April 2017 ...
Page 131: ...7 3 The Remote Management Console Figure 98 Remote Management Pages Map ETERNUS CS800 131 ...
Page 173: ...8 8 AIS Connect Figure 132 AISConnect Wizard Confirm ETERNUS CS800 173 ...
Page 449: ...16 2 Storage Subsystem Figure 313 Inserting the 3 5 inch HDD module ETERNUS CS800 449 ...
