Fujitsu ETERNUS CS800 S6 User Manual Download Page 534 | Manualshive

Page: 534 / 561

background image

3. The enclosed software and documentation has not been subjected to testing and quality
control and is not a Hewlett-Packard Co. product. At a future time, Hewlett-Packard Co.
may or may not offer a version of the software and documentation as a product.

4. THE SOFTWARE AND DOCUMENTATION IS PROVIDED "AS IS". HEWLETT-PACKARD COMPANY
DOES NOT WARRANT THAT THE USE, REPRODUCTION, MODIFICATION OR DISTRIBUTION OF THE
SOFTWARE OR DOCUMENTATION WILL NOT INFRINGE A THIRD PARTY'S INTELLECTUAL
PROPERTY RIGHTS. HP DOES NOT WARRANT THAT THE SOFTWARE OR DOCUMENTATION IS
ERROR FREE. HP DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, WITH REGARD TO THE
SOFTWARE AND THE DOCUMENTATION. HP SPECIFICALLY DISCLAIMS ALL WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

5.HEWLETT-PACKARD COMPANY WILL NOT IN ANY EVENT BE LIABLE FOR ANY DIRECT,
INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS)
RELATED TO ANY USE, REPRODUCTION, MODIFICATION, OR DISTRIBUTION OF THE SOFTWARE
OR DOCUMENTATION.

OpenLdap

openldap-2.4.40-5.el6.i686

### ./usr/share/doc/openldap-2.4.40/LICENSE

The OpenLDAP Public License

Version 2.8, 17 August 2003

Redistribution and use of this software and associated documentation ("Software"), with
or without modification, are permitted provided that the following conditions are met:

1. Redistributions in source form must retain copyright statements and notices,

2. Redistributions in binary form must reproduce applicable copyright statements and
notices, this list of conditions, and the following disclaimer in the documentation and/or
other materials provided with the distribution, and

3. Redistributions must contain a verbatim copy of this document.The OpenLDAP
Foundation may revise this license from time to time.Each revision is distinguished by a
version number.

You may use this Software under terms of this license revision or under the terms of any
subsequent revision of the license.

THIS SOFTWARE IS PROVIDED BY THE OPENLDAP FOUNDATION AND ITS CONTRIBUTORS "AS IS"
AND ANY EXPRESSED OR IMPLIED WARRANTIES,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OPENLDAP
FOUNDATION, ITS CONTRIBUTORS, OR THE AUTHOR(S) OR OWNER(S) OF THE SOFTWARE BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED

ETERNUS CS800

534

«
...
532
533
534
535
536
...
»

Summary of Contents for ETERNUS CS800 S6


















































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ETERNUS CS800 S6

FlashPen "Piko"

Brand: Hama Pages: 4

UniServer BT716F

Brand: H3C Pages: 44

Brand: Asante Pages: 150

Brand: ActionTec Pages: 115

Brand: Transcend Pages: 23

9123710 - eServer OpenPower 710

Brand: IBM Pages: 70

Brand: TerraMaster Pages: 13

Brand: NCR Pages: 10

BACnet/IP Server-SUNWAYS

Brand: IntesisBox Pages: 5

Brand: Fibrenetix Pages: 17

Brand: NetCommWireless Pages: 28

Brand: Firetide Pages: 32

Brand: BinTec Pages: 2

Brand: Seagate Pages: 32

Brand: IBM Pages: 21

Brand: WiebeTech Pages: 8

Brand: Niveo Professional Pages: 49

Brand: H3C Pages: 148

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands