Fujitsu ETERNUS CS800 S6 User Manual Download Page 387

Page: 387 / 561

12.3 Performance

Status

The status of the storage array.

Normal

- (Green) The component is operating

correctly.

Attention

- (Yellow) There is a problem with the

component.

Failed

- (Red) The component has failed.

The

Components

section displays the following information about the components in the

selected storage array:

Component

The name of the component.

Click the name of the component to view detailed
information for the component in the subcomponent
section.

Count

The number of that component type in the system.

Status

The status of the component:

Normal

- (Green) The component is operating

correctly.

Attention

- (Yellow) There is a problem with the

component.

Failed

- (Red) The component has failed.

The subcomponent section displays the following information about the subcomponents in
the selected component:

Component

The name of the subcomponent.

Location

The location of the subcomponent within the system.

Value

The value reported by the subcomponent.

Status

The status of the subcomponent.

Normal

- (Green) The component is operating

correctly.

Attention

- (Yellow) There is a problem with the

component.

Failed

- (Red) The component has failed.

12.3 Performance

The

Performance

page allows you to view information about system performance,

including inline throughput, network throughput, read/write throughput, and CPU usage.

ETERNUS CS800

387

Summary of Contents for ETERNUS CS800 S6


















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ETERNUS CS800 S6

Reviews:

Fujitsu ETERNUS CS800 S6, User Manual, Page: 387 / 561

Search results

Summary of Contents for ETERNUS CS800 S6

Reviews: