Fujitsu ETERNUS CS800 S6, User Manual

Page: 290 / 561

10.8 Notifications
Figure 199: AISConnect Proxy
2. Edit the required information (see Table 21 for a description of the fields).
3. Click Apply .
In order to set up the configuration of AISConnect you have to click Apply –even
if you do not use a Proxy. This action also starts the AISConnect service.
Field Description
Server Enter the IP address of the HTTP proxy to be used to
contact the AIS server at the Fujitsu Service Centre.
Port Enter the port number of the HTTP proxy.
Authentication Enabled Activate the checkbox if the HTTP proxy requires
authentication.
NTML Authentication Enabled Activate the checkbox if the HTTP proxy requires NTLM (NT
LAN Manager) authentication.
Username Enter the user name for proxy authentication.
Password Enter the password for proxy authentication.
Country Select the country where your ETERNUS CS800 is located.
Table 23: AISConnect Information
Control
Use the Control page to stop or start the AISConnect service.
ETERNUS CS800 290