10.2 NAS Configuration
1. Enter the following information about the Windows domain:
Domain Type
Select
Active Directory
.
Domain/Workgroup Name
Enter the domain name.
Primary Domain Controller
Select an option for the Primary Domain Controller
(PDC):
l
Use DNS Discovery
- Discover the PDC
automatically.
l
Specify Address
- Enter the fully qualified name
or the IP address of the PDC.
Organization Unit
(Optional) Enter the name of the organizational unit
in the domain.
The ETERNUS CS800 will become a member of this
organization.
Administrator Name
Enter
Administrator
or any user that has the right to
join the domain.
By default, any user belonging to the
Administrators
group or the
Domain Admins
group has the right to
join the domain. In addition, any user can join the
domain if they are specifically delegated this right by
a member of the
Administrators
group.
Administrator Password
Enter the password for the user entered above.
2. Click
Apply
.
When the system is joined to the Active Directory domain, share security is
managed by the MMC (Microsoft Management Console) that is running on the
domain controller. By default, when a CIFS share is created, the default security
setting allows access for all users. Any access restrictions on individual users
must be managed from the MMC.
Disjoining a Workgroup or Domain
Disjoin a workgroup or a domain to remove the ETERNUS CS800 from a Windows
workgroup or domain. After you disjoin the workgroup or domain, CIFS shares are no
longer available for use on the Windows network
To disjoin a workgroup or domain, click
Disjoin
.
ETERNUS CS800
197
Summary of Contents for ETERNUS CS800 S6
Page 1: ...English ETERNUS CS800 S6 User Guide V3 2 7 Edition April 2017 ...
Page 131: ...7 3 The Remote Management Console Figure 98 Remote Management Pages Map ETERNUS CS800 131 ...
Page 173: ...8 8 AIS Connect Figure 132 AISConnect Wizard Confirm ETERNUS CS800 173 ...
Page 449: ...16 2 Storage Subsystem Figure 313 Inserting the 3 5 inch HDD module ETERNUS CS800 449 ...
