Fujitsu ETERNUS CS800 S6, User Manual, Page: 138 / 561

8.2 NAS Wizard
Enable deduplication Select the check box to enable data
deduplication. Fujitsu Technology Solutions
recommends that you enable data
deduplication to optimize disk usage.
Data deduplication is enabled by default.
You cannot enable or disable data
deduplication after the share is added.
Hide from network browsing (Windows shares only) Select the check box to
hide the share from network browsing. If
selected, you cannot see the share when
browsing the network.
Export Protocol (Available only if you selected the Both option
in Step 2: Protocol) Select the export protocol
for the share:
l
CIFS/SMB - Select the CIFS/SMB option to
use the share on a Windows network.
l
NFS - Select the NFS option to use the share
on a UNIX or Linux network.
2. Click Add .
3. (Optional) To add additional shares, repeat Steps 1–2.
4. Click Next to continue.
Figure 102: NAS Wizard: Add Share
ETERNUS CS800 138