Fujitsu ETERNUS CS800 S6 User Manual Download Page 12

Page: 12 / 561

1.1 Preface

1.1.1

Support and Help

Where to find information

Resource

Address

Product information and
documentation

ETERNUS CS 800 S6 product information on the internet.

ETERNUS CS800 manuals

http://manuals.ts.fujitsu.com/index.php?id=9662-9665

Release note

http://manuals.ts.fujitsu.com/index.php?id=9662-9665

Downloads and Software
patches

http://support.ts.fujitsu.com/Index.asp?

Select Storage – ETERNUS CS.

Safety Notes and Regulations

http://manuals.ts.fujitsu.com/index.php?l=en

1.1.2

Technical Support

The ETERNUS CS800 system includes AIS real-time support via remote access (see

"AIS

Connect" on page 289

)

The Support section of the Fujitsu web site provides links with contact information and
information about available support programs:

http://www.fujitsu.com/fts/services/

If you have an active support agreement, you may contact your service provider.

If you do not have an active support agreement, contact your Fujitsu sales representative
to purchase a service contract or updates.

1.1.3

Customer Service

Resource

Address

Education and training

Fujitsu
Mies-van-der-Rohe-Str. 8
80807 Munich
Germany

[email protected]

Support phone

+49-180-54040

Support fax

+49-180-5336779

ETERNUS CS800

Summary of Contents for ETERNUS CS800 S6


















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ETERNUS CS800 S6

Reviews:

Related manuals for ETERNUS CS800 S6

Brands by name

Popular brands

Fujitsu ETERNUS CS800 S6, User Manual

Search results

Summary of Contents for ETERNUS CS800 S6

Reviews:

Related manuals for ETERNUS CS800 S6

Brands by name

Popular brands