Fujitsu ETERNUS CS800 S5 User Manual Download Page 421

Page: 421 / 634

Status

Disk Usage

U41840-J-Z125-7-76

407

●

Shares & Partitions

- The amount of data stored on the ETERNUS CS800 via local

I/O.

●

NFS Deduplicated Shares

- The amount of data stored in deduplicated shares

configured in Network File System (NFS) format for Linux systems.

●

CIFS Deduplicated Shares

- The amount of data stored in deduplicated shares

configured in Common Internet File System (CIFS), also known as Server Message
Block (SMB), format for Windows systems.

●

Deduplicated Partitions

- The amount of data stored in deduplicated partitions.

Data After Reduction

The data reduction area displays the data reduction performance for the system. Data
reduction is divided into the following categories:

●

Data Size Before Reduction

- The original, native size of all data that has been

processed by the data deduplication and compression engines.

●

Data Size After Reduction

- The final, reduced size of all data that has been processed

by the data deduplication and compression engines.

●

Total Reduction Ratio

- The total reduction ratio of all data that has been processed

by the data deduplication and compression engines (

Data Size Before Reduction

divided by

Data Size After Reduction

●

Deduplication Ratio

- The deduplication ratio of all data that has been processed by

the data deduplication engine.

●

Compression Ratio

- The compression ratio of all data that has been processed by the

compression engine.

Summary of Contents for ETERNUS CS800 S5



























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ETERNUS CS800 S5

Reviews:

Related manuals for ETERNUS CS800 S5

Brands by name

Popular brands

Fujitsu ETERNUS CS800 S5, User Manual

Search results

Summary of Contents for ETERNUS CS800 S5

Reviews:

Related manuals for ETERNUS CS800 S5

Brands by name

Popular brands