manualshive.com logo in svg

Fujitsu ETERNUS CS800 S5, User Manual

Share
Download
Fujitsu ETERNUS CS800 S5 User Manual Download Page 198

Current Activity Overview

Home Page

184

 

 U41840-J-Z125-7-76

Current Activity Overview

The 

Current Activity

 overview on the 

Home

 page (see 

Figure 121

) displays the following 

information about system activity that occurred in the previous minute:

●

Inline

 - The inline data flow throughput (in MB/s). Inline data flow includes deduplicated 

and non-deduplicated backup data as well as received replication data. Click to view 
detailed statistics for inline performance (see 

"Inline" on page 398

).

●

Replication Throttle

 - The system replication throttle currently in effect (in KB/s or 

MB/s). When a constant throttle is enabled, the ETERNUS CS800 limits the amount of 
data it sends during source replication so that it does not exceed the specified 
bandwidth. Click to enable or disable system throttling (see 

"Replication Configuration" 

on page 232

).

●

Ethernet

 - The amount of data received (

In

) and sent (

Out

) by all Ethernet ports (in 

MB/s). Click to view details statistics for Ethernet performance (see 

"Ethernet" on 

page 399

).

●

Fibre Channel

 - The amount of data received (

In

) and sent (

Out

) by all Ethernet ports 

(in MB/s). Click to view details statistics for Fibre Channel performance (see 

"Fibre 

Channel" on page 402

).

●

OST Service

 - The status of the OST service. OST settings can be configured in 

Ready

, 

Stopped

, or 

Verifying

 state. The OST server is available for backup only in 

Ready

 state.

●

Inline (OpDup)

 - The inline data flow throughput (in MB/s). Inline data flow repre-

sents the original, native size of the data protected by the system.

●

Ethernet In (OpDup)

 - The amount of data received by all Ethernet ports (in MB/s). 

This amount represents the reduced size of the data protected by the system (after 
deduplication and compression on the media servers).

●

OpDup Bandwidth Reduction

 - The percentage by which network bandwidth utili-

zation was reduced by using Optimized Duplication.

I

Accent activity displays only if System Accent is currently enabled or was 
previously enabled (see 

"Accent" on page 266

).

●

Inline (Accent)

 - The inline data flow throughput (in MB/s). Inline data flow repre-

sents the original, native size of the data protected by the system.

●

Ethernet In (Accent)

 - The amount of data received by all Ethernet ports (in MB/s). 

This amount represents the reduced size of the data protected by the system (after 
deduplication and compression on the media servers).

●

Accent Bandwidth Reduction

 - The percentage by which network bandwidth utili-

zation was reduced by enabling Accent.

Summary of Contents for ETERNUS CS800 S5



























































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands