manualshive.com logo in svg

Fujitsu ETERNUS AX Series, Manual, Page: 34 / 68

Share
Download
Fujitsu ETERNUS AX Series Manual Download Page 34

1.     ETERNUS AX/HX Installation
      Outlet/Socket Specifications

Site Planning Guide

34

Specifications for Optional Power Supply Products

This section explains the specifications of optional power cords and power related optional products for the ETER-
NUS AX/HX.
When using power distribution units, take the number of outlets required to connect each shelf into consider-
ation to select the most appropriate power distribution units.
When an existing power socket is used, make sure that the plug type of the power distribution unit fits the exist-
ing power socket and that the power supply facility is able to provide sufficient power to the system. If the plug
type does not fit the power socket, electrical work to change the power socket is required. This electrical work
must be performed in compliance with the electrical codes of the nation, the municipality, or the region.

■

AC200V Power Cords

AC200V power cords are used to connect devices to the NEMA L6-15R power socket type. These power cords can
be used if the specifications of the connection device allow AC200V.

Table 17    Specifications for AC250V Power Cords (IEC60320 C13 - NEMA L6-15P)

AC200V power cords are used to connect devices to the IEC60320 C19 power socket type.
These power cords can be used if the specifications of the connection device allow AC200V.

Table 18    Specifications for AC250V Power Cords (IEC60320 C19 - C20)

AC200V power cords are used to connect devices to the NEMA L6-20R power socket type.
These power cords can be used if the specifications of the connection device allow AC200V.

Table 19    Specifications for AC250V Power Cords (IEC60320 C19 - NEMA L6-20P)

Usage

Plug type

(Socket)

Socket type

(Power supply unit)

Power cord 

length

Voltage rating/current rating

Used for connection between 
the ETERNUS AX/HX and the 
socket
(IEC60320 C13 <-> NEMA L6-
15P)

NEMA L6-15P

IEC60320 C13

4.0 m

250V/10A

Usage

Plug type

(Socket)

Socket type

(Power supply unit)

Power cord 

length

Voltage rating/current rating

Used for connection between 
the ETERNUS AX/HX and the 
socket
(IEC60320 C19 <-> IEC60320 
C20)

IEC60320 C20

IEC60320 C19

3.0 m

250V/16A

Usage

Plug type

(Socket)

Socket type

(Power supply unit)

Power cord 

length

Voltage rating/current rating

Used for connection between 
the ETERNUS AX/HX and the 
socket
(IEC60320 C19 <-> NEMA L6-
20P)

NEMA L6-20P

IEC60320 C19

3.0 m

250V/16A

Summary of Contents for ETERNUS AX Series





































































Reviews:

No comments