2.2
Powering On and Off
This section explains how to turn on and off the ETERNUS AF.
2.2.1
Switching On and Off the Main Line Switch on the Power Distribution Unit (for
Regions other than the EMEIA, Central American, and Caribbean Regions)
This section explains how to switch the main line switch of the power distribution unit to ON and OFF.
■
To Switch to ON
Turn the main line switch of the power distribution unit to the ON position (marked "|").
Make sure all of the main line switches are in the ON position.
●
For 1U
Figure 2.1 ON Position (Marked "|") of the Main Line Switches on a 1U Power Distribution Unit
Main line switch
●
For 2U
Figure 2.2 ON Position (Marked "|") of the Main Line Switches on a 2U Power Distribution Unit
Main line switch
Chapter 2 Basic Operation
2.2 Powering On and Off
33
FUJITSU Storage ETERNUS AF650 S2, ETERNUS AF650 All-Flash Arrays Operation Guide (Basic)
Copyright 2017 FUJITSU LIMITED
P3AG-1932-04ENZ0
Summary of Contents for ETERNUS AF650 S2
Page 2: ...This page is intentionally left blank ...
Page 59: ......
