Fujitsu ETERNUS AF250 User Manual Download Page 328

Page: 328 / 423

Chapter 7 Thin Provisioning Pool Status
7.1 Thin Provisioning Pools

ETERNUS Web GUI User’s Guide (Operation)

P2X0-1260-19ENZ0

328

7.1.2

Thin Provisioning Pool Detail (Basic)

Click the [No.] link or the [Name] link on the

"7.1 Thin Provisioning Pools" (page 325)

to display the

corresponding Thin Provisioning Pool Details screen.

The following items are displayed in the Main area:

•

Drive Type
The type of drive that configures the TPP is displayed.

Online
SAS disks

Nearline
Nearline SAS disks

SSD
SSDs (*1)

Online SED
Online SEDs

Nearline SED
Nearline SEDs

SSD SED
SSD SEDs

*1:

"SSD" is displayed regardless of the actual SSD type (SSD-M/SSD-L/SSD).

•

RAID Level
The level of RAID group that configures the TPP is displayed.

High Performance (RAID1+0)

High Capacity (RAID5)

High Reliability (RAID6)

High Reliability (RAID6-FR)

Mirroring (RAID1)

Striping (RAID0)

Summary of Contents for ETERNUS AF250







































































































































































































































































































































































































































Search results

Summary of Contents for ETERNUS AF250

Reviews:

Related manuals for ETERNUS AF250

Brands by name

Popular brands

Fujitsu ETERNUS AF250, User Manual

Search results

Summary of Contents for ETERNUS AF250

Reviews:

Related manuals for ETERNUS AF250

Brands by name

Popular brands