Troubleshooting and tips
The device cannot be switched off with the On/Off switch.
Cause
Troubleshooting
System crash
►
Press the On/Off switch for at least
4 seconds, until the device switches off.
Attention: Warning, this could lead to a loss of
data!
The Operating System is not shut-down properly
in the process. Error messages are therefore
possible the next time the system is booted.
Monitor remains blank
Cause
Remedy
Monitor is switched off
►
Switch your monitor on.
Power saving has been activated (screen is
blank)
►
Press any key on the keyboard.
or
►
Deactivate the screen saver. If
necessary, enter the appropriate
password.
Brightness control is set to dark
►
Adjust the brightness control. For detailed
information, please refer to the operating
manual supplied with your monitor.
Power cable not connected
►
Switch off the monitor and the device.
►
Check that the monitor power cable is
properly connected to the monitor and to
a grounded mains outlet or to the monitor
socket of the device.
►
Check that the device power cable is
properly plugged into the device and a
grounded mains outlet.
►
Switch on the monitor and the device.
Monitor cable not connected
►
Switch off the monitor and the device.
►
Check that the monitor cable is properly
connected to the device and monitor.
►
Switch on the monitor and the device.
Incorrect setting for the monitor
►
Restart the system.
►
Press
F8
while the system is booting.
►
Start the system in Safe Mode.
►
Set up the monitor as described in the
documentation for your operating system
and monitor.
40
Fujitsu
