Fujitsu EM7455D2 Operating Manual Download

Page: 44 / 119

Accessories for your Tablet PC (optional)

Connecting the Tablet PC to the cradle

It is possible to connect the Tablet PC to the cradle while it is running.

Disconnect the AC adapter from the Tablet PC before connecting
the Tablet PC to the cradle.

When the Tablet PC is connected to the cradle, you must connect the AC adapter
to the cradle, to be able to use all the cradle’s functions.

Cradle

►

Remove the AC plug of the AC adapter from the power outlet.

►

Remove the AC adapter cable from the DC jack (DC IN) of the Tablet PC.

Your cradle is supplied with a separate AC adapter (19 V, 3.42 A). Make
sure that you only use this AC adapter for the cradle.

►

Position the Tablet PC so that it lies against the storage surface of the cradle.

Fujitsu

Summary of Contents for EM7455D2
























































































































Search results

Summary of Contents for EM7455D2

Reviews:

Related manuals for EM7455D2

Brands by name

Popular brands

Fujitsu EM7455D2, Operating Manual

Search results

Summary of Contents for EM7455D2

Reviews:

Related manuals for EM7455D2

Brands by name

Popular brands