Fujitsu D3320 PRIMERGY BX2560 M2 Reference Manual Download Page 38

Page: 38 / 80

D3320 - BIOS Setup Utility

BX2560 M2

Advanced menu

TPM Clear

TPM will be reset to factory default. All keys within the TPM will be
cleared.

These menu entries are only visible if a TPM2.0 is installed.

None

No TPM operation will be executed.

TPM Clear

TPM will be reset to factory default. All keys within the TPM will be
cleared.

HashPolicy

This menu item is only visible if a TPM2.0 is installed.

Under

HashPolicy

you can choose a secure hash algorithm (SHA) to

secure the TPM data.

SHA-1

is the standard algorithm,

SHA-2

is a new

version of this algorithm.

SHA-1

SHA-1 is used.

SHA-2

SHA-2 is used.

SHA-2 is most secure but might not be supported by all operating
systems.

Current Status Information

Indicates the current state of the TPM (Trusted Platform Module).

4.11

USB Configuration

USB Devices

Displays number of available USB devices, USB keyboards, USB Mouse
and USB Hubs.

xHCI Mode

Specifies in which mode USB devices can be operated at the blue
marked USB 3.0 connectors.

Summary of Contents for D3320 PRIMERGY BX2560 M2

















































































Search results

Summary of Contents for D3320 PRIMERGY BX2560 M2

Reviews:

Related manuals for D3320 PRIMERGY BX2560 M2

Brands by name

Popular brands

Fujitsu D3320 PRIMERGY BX2560 M2, Reference Manual

Search results

Summary of Contents for D3320 PRIMERGY BX2560 M2

Reviews:

Related manuals for D3320 PRIMERGY BX2560 M2

Brands by name

Popular brands