Fujitsu D1919, Technical Manual

Page: 34 / 53

30
A26361-D1919-Z120-1-7419
SCSI/IME configuration program
Default settings in the menu SCSI/IME
Adapter Properties

LSI Logic MPT SCSI Setup Utility Version MPTBIOS-IME-X.XX.XX

 

______________________________________________________________________________

 

Adapter Properties

 

Adapter PCI Dev


Bus Func

 

1020/1030 2 28

 

<Device Properties>


<RAID Properties> <Synchronize Whole Mirror>

 

Host SCSI ID [7]


SCSI Bus Scan Order [Low to High (0.. Max)]


Removable Media Support [None]


CHS Mapping [SCSI Plug and Play Mapping]


Spinup Delay (Secs) [2]


Secondary Cluster [No]


Server [Auto]


Termination Control


<Restore Defaults>

 

______________________________________________________________________________

 

Esc=Abort/Exit Arrow Keys=Select Item -/+ = Change [Item]


Home/End=Select Item Enter=Execute <Item>

Host SCSI ID All SCSI devices on one SCSI bus, including the SCSI controller, must
be set to separate SCSI addresses.
The SCSI controller is normally set to ID 7.
You do not normally need to change the SCSI address, not even if you
install several SCSI controllers. In this case each SCSI controller may
be assigned address 7, because each is connected to it's own SCSI
bus.
SCSI Bus
Scan Order Defines the scan order of the IDs on the SCSI bus.