Fujitsu CELVIN NAS QE707 Operating Manual Download

Page: 57 / 95

Copying data using the front USB port

Data can be copied directly from an external drive to the NAS or vice versa by pressing the
one-touch copy button on the front of the device. To use this function, follow the steps below:

►

Make sure a hard disk has been installed and formatted in the NAS. This
will create the USB standard network share.

►

Switch on the NAS.

►

Con

gure the function of the one-touch copy button on the page

Backup

Manager

USB One-Touch Copy

►

Connect the USB drive (e.g. digital camera or

ash drive) to the front USB port on the NAS.

►

Press the one-touch copy button. Data will be copied to the NAS according
to the previously de

ned settings.

QE707

1 = One-touch copy button

2 = USB 3.0

Fujitsu

Summary of Contents for CELVIN NAS QE707
































































































Search results

Summary of Contents for CELVIN NAS QE707

Reviews:

Related manuals for CELVIN NAS QE707

Brands by name

Popular brands

Fujitsu CELVIN NAS QE707, Operating Manual

Search results

Summary of Contents for CELVIN NAS QE707

Reviews:

Related manuals for CELVIN NAS QE707

Brands by name

Popular brands