System upgrades
A26361-K994-Z220-1-7619, Edition 2
63
Low-profile boards
For units with a particularly low overall height, there are so-called low-profile boards with a slot cover
with a lower overall height to match the low-profile units. To also install these low-profile boards in
normal board slots, you must mount a corresponding slot adapter beforehand
Two-piece board slot covers are fitted to the slots intended for low-profile boards. The two pieces are
connected together with a screw.
i
The following illustrations show the CELSIUS R. The sequence of actions is identical for all
device variants and configuration levels.
►
Remove the desired board slot cover and undo the screw.
►
Make the required settings for the board.
!
Do not dispose of the slot cover. If you remove the board again, you must reinstall the slot
cover (cooling, fire protection or EMC regulations to be complied with).
Mounting slot adapter
2
1
►
Fit the slot adapter on the slot cover of the
low-profile board (1) and screw it on (2).
Now you can install the low-profile board in a
suitable slot like a normal board (see "Installing a
short board").
Removing slot adapter
2
1
►
Unscrew the screw (1) and remove the slot
adapter (2).
