Fujitsu CELSIUS H780 Operating Manual Download Page 62

Page: 62 / 95

Connecting external devices

Connecting USB devices

USBports

On the USB ports, you can connect external devices that also have a USB port
(e.g. a DVD drive, a printer, a scanner or a modem).

USB devices are hot-pluggable. This means you can connect and disconnect
devices while your operating system is running.

USB 1.x has a maximum data transfer rate of 12 Mbit/s.

USB 2.0 has a data transfer rate of up to 480 Mbit/s.

USB 3.0 has a data transfer rate of up to 5 Gbit/s.

USB 3.1 (Gen1) has a data transfer rate of up to 5 Gbit/s.

USB 3.1 (Gen2) has a data transfer rate of up to 10 Gbit/s.

Additional information can be found in the documentation for the USB devices.

► Connect the data cable to the

external device.

► Connect the data cable to a USB

port of the notebook.

Device drivers

USB devices will be automatically recognised and installed by your operating system.

Fujitsu

Summary of Contents for CELSIUS H780
































































































Search results

Summary of Contents for CELSIUS H780

Reviews:

Related manuals for CELSIUS H780

Brands by name

Popular brands

Fujitsu CELSIUS H780, Operating Manual

Search results

Summary of Contents for CELSIUS H780

Reviews:

Related manuals for CELSIUS H780

Brands by name

Popular brands