Fujitsu CELSIUS H5511 Operating Manual Download Page 69

Page: 69 / 80

Troubleshooting and tips

The notebook’s LCD screen remains blank

LCDscreen

LCDscreenistoodark

Cause

Troubleshooting

Monitor is switched off.

► Press a key or touch the touchpad.

External monitor or television set connected.

► Press the key combination to switch the

screen output, see

"Function keys and key

combinations", Page 24

The LCD screen is difﬁcult to read

LCDscreen

Cause

Troubleshooting

Reﬂected glare

► Turn the notebook or alter the tilt of the LCD

screen.

► Increase the brightness of the screen.

The external monitor remains blank

Monitor

Cause

Troubleshooting

Monitor is switched off.

► Switch the external monitor on.

Power saving has been activated (monitor is
blank).

► Press any key to continue.

Brightness is set to dark.

► Adjust the brightness of the monitor.

Screen output is set to the notebook’s LCD
screen

► Press the key combination to switch the

screen output, see

"Function keys and key

combinations", Page 24

The external monitor’s power cable or data
cable is not connected properly.

► Switch off the external monitor and the

notebook.

► Check whether the power cable is plugged

properly into the external monitor and into
the power socket.

► Check whether the data cable is properly

connected to the notebook and the external
monitor (if it is plugged in with a connector).

► Switch on the external monitor and the

notebook.

Fujitsu

Summary of Contents for CELSIUS H5511

















































































Search results

Summary of Contents for CELSIUS H5511

Reviews:

Related manuals for CELSIUS H5511

Brands by name

Popular brands

Fujitsu CELSIUS H5511, Operating Manual

Search results

Summary of Contents for CELSIUS H5511

Reviews:

Related manuals for CELSIUS H5511

Brands by name

Popular brands