Fujitsu CELSIUS H5511 Operating Manual Download Page 66

Page: 66 / 80

Settings in BIOS Setup Utility

Option 1:

Intel Rapid Storage Technology

and

Intel®

Optane® Memory and Storage Management

► Restart the device and simultaneously press on function key

F12

► Press on the tab key in order to change the menu and select

Intel Rapid Storage Technology

► Set a RAID volume.
► To save the changes select

Save Changes and Power OFF

and

Yes

The changes are saved. Your device is shut down.

► Restart the device.
► Install the Windows operating system, all necessary drives and the application

Intel® Optane® Memory and Storage Management

, as described in the readme

ﬁle attached to the Intel iRST/VMD driver pack.

► Install the RAID volume with the application

Intel® Optane® Memory and Storage Management

Option 2:

Intel® Optane® Memory and Storage Management

► Restart the device.
► Install the Windows operating system, all necessary drives and the application

Intel® Optane® Memory and Storage Management

, as described in the readme

ﬁle attached to the Intel iRST/VMD driver pack.

► Set the RAID volume with the application

Intel® Optane® Memory and Storage Management

The data will be migrated in the background.

Fujitsu

Summary of Contents for CELSIUS H5511

















































































Search results

Summary of Contents for CELSIUS H5511

Reviews:

Related manuals for CELSIUS H5511

Brands by name

Popular brands

Fujitsu CELSIUS H5511, Operating Manual

Search results

Summary of Contents for CELSIUS H5511

Reviews:

Related manuals for CELSIUS H5511

Brands by name

Popular brands