Fujitsu BS2000, User Manual

Page: 273 / 374

Managing hardware Managing IP networks
U41855-J-Z125-3-76
271
D
ok
us
ch
a
bl
on
en 1
9x
24 V
e
rs
ion 7.
4
de f
ür
F
ram
e
M
ak
er
V
7.
x
vo
m
09
.0
2.
20
10
©
c
og
ni
ta
s Gm
b
H
20
01
-20
10
19
. M
ar
ch
201
8 S
ta
nd 18
:4
2.
31
P
fad
: P
:\F
T
S
-B
S
\S
er
ve
r\
S
E
-S
er
ve
r\
S
E
-D
ok
u\
13
039
12
_B
uV
_0
62
\B
u
V
_
e\
bu
v.
k1
0
The following functions are available:
Displaying the MAC address
Ê
In the
Net Unit information
group click the
MAC addresses
icon by the required unit.
The subsequent dialog box
Display MAC addresses
displays the unit's active MAC
addresses.
Adding ports
Ê
In the
Net Unit information
group click
Add ports
, follow the instructions of the wizard,
and select the ports.
Removing a port
Ê
In the
Net Unit information
group click the
Delete
icon by the required unit and confirm
the action.
10.2.4.1 Configuring the ACL settings of the MANPU network
You can add and delete ACL entries for each MANPU.
Ê
Select
Hardware
→
IP networks
→
Management Network Public
→
[
<se server>(SE<model>)
→ ]
MANPU
,
ACL
tab.
v
If you set
permit
mode and enable ACL without entering services in the list,
network access is locked for all services. For the MANPU network this means
that you, as administrator, "lock yourself out."
Proceed as described in section “Configuring the ACL settings of the DANPU network”
on page 261 .
10.2.4.2 Information on the performance and utilization of the MANPU ports
An overview of the performance and utilization of the ports belonging to the public
management network is provided by the
Performance
tab.
Ê
Select
Hardware
→
IP networks
→
Management Network Public
→
[
<se server>(SE<model>)
→ ]
MANPU
,
Performance
tab.
The
Performance
tab displays the
Uplink performance view, ISL performance view
and
Unit
performance view
tables.
Detailed information is provided in section “Information on the performance and utilization
of the DANPU ports” on page 263 .